JMC MESH FLAT

Part Number: #JMC MESH FLAT
1-9 pcs are $5.00 each plus shipping
10 pcs+ for $4.50 each plus shipping


Lots of great drainage holes in the bottom of this tray.   This tray holds 2 inch and 2.25 inch pots very well.


5.0 B Tray

Part Number: #5.00BTRAY
1-9 pcs are $4.50 each plus shipping
10 pcs+ for $4.00 each plus shipping


This is a sturdy tray with ultimate drainage.  The other trays that fit inside this one are the # 32 CELL 2.25S TRAY and the # 18 CELL 3.5S TRAY.

Plastic Nursery

Plant Trays


21 3/4" long x 11" wide  x 2 7/8" deep

Part Number: #JMCMS558B
1-9 pcs are $5.00 each plus shipping
10 pcs+ for $4.50 each plus shipping


Image Coming Soon!


19 1/4" long x 13 1/2" wide  x 2 5/8" deep

Part Number: #TRPTGAL
1-9 pcs are $5.00 each plus shipping
10 pcs+ for $4.50 each plus shipping


This is a solid tray without drainage holes.  The other trays that fit inside this one are the # 32 CELL 2.25S TRAY and the # 18 CELL 3.5S TRAY.

Chula Orchids Home Page


12 Cell Tray for 3 Inch Round Pots
Part# 12 CELL 3R TRAY
(1-9 pieces) are $2.75 each plus shipping
12+ pieces) for $2.50 each plus shipping


This is the tray I use for just about anything heavy, from 5 1/2" pot diameter down.  It is made specifically for use with these square 5.5" x 6" deep pots.  


Nothing is more maddening than to have just finished potting a bunch of tall plants and then have one tip over into the rest.  Then they all go down.  


This tray holds both round and square one gallon pots.  You can see the heavy duty partitions in the tray supporting the postmen though one is very tall and off balance.  That is the beauty of this tray.​​

Chula Orchids to order or contact


4.33 B Tray

Part Number: #4.33BTRAY
1-9 pcs are $4.50 each plus shipping
10 pcs+ for $4.00 each plus shipping



JMC 1020 tray with holes

Part Number: #JMC 1020 FLAT WH
1-9 pcs are $5.00 each plus shipping
10 pcs+ for $4.50 each plus shipping


This is a solid tray with drainage holes.  The other trays that fit inside this one are the # 32 CELL 2.25S TRAY and the # 18 CELL 3.5S TRAY.

Contact email : excellence@chulaorchids.com

Here we have a tray made for the 4.33 pot it also holds the 4.0NCUV nicely.   This tray is made from recycled water bottles so it is a great way to go green.  This tray also exhibits good strength and is tear resistant.


Same as above with no holes

Part Number: #JMC 1020 FLAT NH
1-9 pcs are $5.00 each plus shipping
10 pcs+ for $4.50 each plus shipping


Here we have a tray made for the 5.00B pot.   This tray is made from recycled water bottles so it is a great way to go green.  This tray also exhibits good strength and is tear resistant.


32 Cell Tray for 2.25 Inch Square Pots 

Part Number: # 32 CELL 2.25S TRAY

1-9 pcs are $5.00 each plus shipping
10 pcs+ for $4.50 each plus shipping


Nicely rounded and finished off, this tray holds 6 1/2" pots.  There are drainage slots located in the bottom of the tray.

A small, light, white tray that has a dozen cavities for pots 3" size and under.  Each cavity has four holes.  The white color also reflects all the light possible to help the plant grow.  This tray holds 3 sizes of our pots well you can see in the photos below.  This tray is 9 3/16" wide X 12 1/8" long.