Tall Orchid Pots Anderson Cross Bottom Bands

14" x 14" x 5" Deep Propagation Flats

Part# DFLAT5

(1-9 pcs) -  $8.00 each + shipping

(10+ pcs) -  $7.50 each + shipping

3.5" x 3.5" x 6" Cross Bottom Orchid Band

with 8 EXTRA HOLES

Part# ORBA 3 EX8

$4.25 each + shipping

High quality, heavy duty black plastic orchid pot, 4 inch square x 10 inch tall that were made in the USA.  This pot has a slight taper from top to bottom.
It will make a fine pot for miniature Cymbidiums and Phalaenopsis.  They will love all the root room in this 10 inch deep square pot featuring ultra drainage.  You will want to line the bottom of the pot with some wire mesh, sphagnum moss, or other common material used in the orchid growing world.
I think with the new mixes it will make a good place to start back bulbs and grow them until they bloom.  These are also popularly used as tree starters because they are big enough to allow for a long tap root to grow.

High quality, heavy duty black plastic orchid pot, 3.5 inch square x 6 inch tall that were made in the USA.  This pot has a slight taper from top to bottom.
It will make a fine pot for miniature Cymbidiums and Phalaenopsis.  They will love all the root room in this 6 inch deep square pot featuring ultra drainage.  You will want to line the bottom of the pot with some wire mesh, sphagnum moss, or other common material used in the orchid growing world.
I think with the new mixes it will make a good place to start back bulbs and grow them until they bloom.  These are also popularly used as tree starters because they are big enough to allow for a long tap root to grow.

8 Extra holes 5/8 of an inch each have been drilled into this pot, two on each side to increase aeration throughout the band.

Tall Orchid Pots Anderson Cross Bottom Bands
Chula Orchids to order or contact

High quality, heavy duty black plastic orchid pot, 5 inch square x 12 inch tall that were made in the USA.  This pot has a slight taper from top to bottom.


It will make a fine pot for cymbidiums up to blooming size.  They will love all the root room in this 12 inch deep square pot featuring ultra drainage.  You will want to line the bottom of the pot with some wire mesh, sphagnum moss, or other common material used in the orchid growing world.

I think with the new mixes it will make a good place to start back bulbs and grow them until they bloom.  These are also used as tree starters because they are big enough to allow for a long tap root to grow.

Tall Orchid Pots Anderson Cross Bottom Bands

Contact email : excellence@chulaorchids.com

This sturdy, heavy duty 4 inch deep tray with a mesh bottom is ideal for large and tall pots.  

​Holds 16 of the 4 inch x 10 inch deep band pots.

​Holds 9 of the 5 inch x 5.75 inch deep Aircone pots with room to allow in air around the edges.

Each flat weighs 1 pound 7 ounces!

4" x 4" x 10" Cross Bottom Orchid Band / Tree Pot

Part# ORBA 4

(1-9 pcs) -  $2.75 + shipping
(10+ pcs) -  $2.50 + shipping

Chula Orchids

Cross Bottom Orchid Bands by Anderson

High quality, heavy duty black plastic orchid pot, 3.5 inch square x 6 inch tall that were made in the USA.  This pot has a slight taper from top to bottom.
It will make a fine pot for miniature Cymbidiums and Phalaenopsis.  They will love all the root room in this 6 inch deep square pot featuring ultra drainage.  You will want to line the bottom of the pot with some wire mesh, sphagnum moss, or other common material used in the orchid growing world.
I think with the new mixes it will make a good place to start back bulbs and grow them until they bloom.  These are also popularly used as tree starters because they are big enough to allow for a long tap root to grow.

This sturdy, heavy duty 5 inch deep tray with a mesh bottom is ideal for large and tall pots.  

Holds 16 of the 3 3/8 inch x 5 inch deep band pots.

Holds 9 of the 5 inch x 12 inch deep band pots.

Each flat weighs 1 pound 5 ounces!

Tall Orchid Pots Anderson Cross Bottom Bands
Tall Orchid Pots Anderson Cross Bottom Bands

5" x 5" x 12" Cross Bottom Orchid Band

with EXTRA HOLES

Part# ORBA 5 EX16

$6.00 each + shipping

15" x 15" x 4" Deep Propagation Flats

Part# DFLAT 4

(1-9 pcs) -  $8.00 each + shipping

(10+ pcs) -  $7.50 each + shipping

Tall Orchid Pots Anderson Cross Bottom Bands

3.5" x 3.5" x 6" Cross Bottom Orchid Band / Tree Pots 

Part# ORBA 3

(1-9 pcs) -  $2.25 + shipping
(10+ pcs) -  $2.00 + shipping 

Chula Orchids Home Page

High quality, heavy duty black plastic orchid pot, 4 inch square x 10 inch tall that were made in the USA.  This pot has a slight taper from top to bottom.
It will make a fine pot for miniature Cymbidiums and Phalaenopsis.  They will love all the root room in this 10 inch deep square pot featuring ultra drainage.  You will want to line the bottom of the pot with some wire mesh, sphagnum moss, or other common material used in the orchid growing world.
I think with the new mixes it will make a good place to start back bulbs and grow them until they bloom.  These are also popularly used as tree starters because they are big enough to allow for a long tap root to grow.

16 Extra holes 5/8 of an inch each have been drilled into this pot, four on each side to increase aeration throughout the band.

Tall Orchid Pots Anderson Cross Bottom Bands
Tall Orchid Pots Anderson Cross Bottom Bands

4" x 4" x 10" Cross Bottom Orchid Band

​with 16 EXTRA HOLES

Part# ORBA 4 EX16

$5.75 each + shipping

5" x 5" x 12" Cross Bottom Orchid Band / Tree Pot

Part# ORBA 5

(1-9 pcs) -  $4.00 each + shipping

(10+ pcs) -  $3.75 each + shipping

High quality, heavy duty black plastic orchid pot, 5 inch square x 12 inch tall that were made in the USA.  This pot has a slight taper from top to bottom.
It will make a fine pot for cymbidiums up to blooming size.  They will love all the root room in this 12 inch deep square pot featuring ultra drainage.  You will want to line the bottom of the pot with some wire mesh, sphagnum moss, or other common material used in the orchid growing world.
I think with the new mixes it will make a good place to start back bulbs and grow them until they bloom.  These are also used as tree starters because they are big enough to allow for a long tap root to grow.

​16 Extra holes 5/8 of an inch each have been drilled into this pot, four on each side for excellent aeration.