Here you can see how much more volume this pot has than round pots of similar size.  On the left is a 6" pot (6.0NCUV) and on the right you see the 6.5" (6.5NCUV).  The amount of mix left in the bottom of the square pot is how much more it holds.

Scroll Down for more colored pots continued below. 

​Plastic ​​​Nursery Pot - 3.50 Inch Square x 4 Inch Tall  (black)​
Part Number: #JMC SQ 350 B

(1-5 pcs) - $0.90 each + shipping
(6-49 pcs) - $0.80 each + shipping
(50-249 pcs) - $0.60 each + shipping
(250+ pcs) - $0.50 each plus shipping (VIP)

They also fit perfectly in our #5.00BTRAY.

Chula Orchids Home Page

Plastic Nursery Pot - 2.25 Inch square x 3 1/4 Inch Tall (green)
Part Number: #AND SQR 225​

(1-9 pcs) -  $0.80 each + shipping
(10-99 pcs) - $0.70 + shipping
(100-249 pcs) - $0.50 + shipping
(250+ pcs) - $0.45 + shipping (VIP)​

Plastic Nursery Bottomless Band 2.25 Inch Square by 5 Inch Deep
Part Number: #FAR NB 5

(1-5 pcs) -  $0.65 each + shipping
(6-49 pcs) - $0.60 + shipping
(50-249 pcs) - $0.40 + shipping
(250+ pcs) - $0.35 + shipping (VIP)​

​Excellent and sturdy pot.  No lip for smoother label access and holes on the side for easier drainage.  These are called "rose pots" because of the depth.  Excellent for seedling paphs and cymbidiums and plants like that.  Obviously great for rose cutting too!

Plastic Nursery Pot 5.5 Inch Round x 4.25 Inch Tall  
Part Number: #JMC 5.5 R G

(1-5 pcs) -  $1.25 each + shipping
(6-49 pcs) - $1.15 + shipping
(50-249 pcs) - $0.80 + shipping
(250+ pcs) - $0.75 + shipping (VIP)

Listed in order from smallest to largest diameter

measurement at the top of the pot.

ALL COLORED POTS ARE IN LIMITED SUPPLY

Pot measures 5.3" diameter at the top, 5.0" tall, 3.5" diameter at the bottom.  Great economical and environmental friendly pots made from recycled water bottles.  They are not a thick pot and that is reflected in the low price. 
This one holds approximately 1 quart of mix.  It has a glossy black finish and is a great starter pot for many plants.  There is a good taper on the sides so your plants are easy to remove without disturbing the roots.  

Plastic ​​Nursery Pot - 2.75 Inch Square x 2.75 Inch Tall
Part Number: #JMC SQ 275

(1-9 pcs) -  $0.80 each + shipping
(10-99 pcs) - $0.75 + shipping
(100-249 pcs) - $0.55 + shipping
(250+ pcs) - $0.50 + shipping (VIP)​

5.00B plastic plant tray, nursery tray

Plastic Nursery Pot - 6.5 Inch Round x 4.25 Inch Tall

with EXTRA HOLES
Part Number: #JMC 6.5 EX9

$3.50 each + shipping

Plastic Nursery Pot - Heavy Duty 5 Inch Round x 5 Inch Tall

with EXTRA HOLES
Part Number: #JMC 5X5 B EX9

$3.00 each + shipping

A very popular pot with anyone who has tried them.  Some customers really appreciate the extra drainage and air circulation to the plants in these pots.  They have 8 holes 1/2 inch in size drilled around the center of the pot, 4 low and 4 higher, and one extra hole drilled down the center of the bottom.  It is a heavy duty pot with a good lip for hanging up.


Plastic ​​Seedling Pot - 2.0 Inch Square x 2 1/8 Inch Tall
Part Number: #AND SQ 2
(1-9 pcs) -  $0.62 each + shipping

(10-99 pcs) - $0.57 + shipping

(100-249 pcs) - $0.34 + shipping

(250+ pcs) - $0.30 + shipping (VIP)

9 EXTRA HOLES 5/8 of an inch wide have been drilled into this pot.  A one quart injection molded black nursery pot that is handy for starting plants that can later be transferred to gallons.  Alstroemerias, herbs, yard plants, paths, cymbidiums, etc. all do fine in them.


Plastic Nursery Pot - 2.25 Inch Square x 2 3/8 Inch Tall (green)
Part Number: #JMC SQ 225

(1-9 pcs) -  $0.62 each + shipping
(10-99 pcs) - $0.57 + shipping
(100-249 pcs) - $0.34 + shipping
(250+ pcs) - $0.30 + shipping​ (VIP)

Available in black, green, or terra-cotta.  A very popular pot with anyone who has tried them.  Some customers really appreciate the extra drainage and air circulation to the plants in these pots.  They have 8 holes drilled around the center of the pot, 4 low and 4 higher, and one extra hole drilled down the center of the bottom.  It is a heavy duty pot with a good lip for hanging up.

Pot measures 4.3" diameter at the top, 5.4" tall, and 3.0" diameter at the bottom.  Great economical and environmental friendly pots made from recycled water bottles.  They are not a thick pot and that is reflected in the low price. 


This one holds 1.6 pints of mix.  It has a glossy black finish and is a great starter pot for many plants.  There is a good taper on the sides so your plants are easy to remove without disturbing the roots.

Excellent and sturdy little pot.  No lip for smoother label access and holes added on the side for easier drainage.  Available in green or black.

​​Plastic Nursery Pot - 4.3 Inch Round x 5.4 Inch Tall
Part Number: #4.3 BM

(1-9 pcs) -  $0.65 each + shipping
(10-99 pcs) - $0.55 + shipping
(100-249 pcs) - $0.45 + shipping
(250+ pcs) - $0.35 + shipping (VIP)

Chula Orchids to order or contact

It is a heavy duty pot with a good lip for hanging up.  Available in black, green, or terra-cotta.

This beautiful, strong, square pot is available in three colors: black, yellow, and terra-cotta.  

To increase stability at any time, use our perfectly sized nursery tray JMC 5.5 TRAY.


These are great for starting plants indoor every year.  Tough and heavy duty they will give great service for years.  No bottom in these makes removing the seedling a breeze without disturbing the roots.  Just a tap and they fall into your hand.  These measure 2 3/16 inside and square at the top, 1 15/16 square at the bottom and are 5 inches deep for a good root system.  They are tapered so the mix doesn't fall out after moistened.  


Fill them with mix and start your seed very early.  By plant out time, your plant will have root systems and be ready to plant out and produce.  Also great for starting tree seedlings letting that tap root develop in a taller pot.

Use them in our trays, holes or no holes, or the regular 1020 flats.

4.3B plastic nursery tray, plant tray

Small, heavy duty nursery pot for seedlings.  It has a new design with no lip for easier label insertion and holes added in the side for easier drainage.  Available in green, black, or terracotta.

A one quart injection molded black nursery pot that is handy for starting plants that can later be transferred to gallons.  Alstroemerias, herbs, yard plants, paths, cymbidiums, etc. all do fine in them.


Contact email : excellence@chulaorchids.com

Plastic Nursery Pot 5.5 Inch Round x 4.25 Inch Tall  

with EXTRA HOLES
Part Number: #JMC 5.5 R G EX9

$3.00 plus shipping

Excellent little pot.  No lip for smoother label access.  8 holes in the bottom with 4 of them raised, provide excellent drainage.

Plastic Nursery Pot - 5.3 Inch x 5 Inch Tall
Part Number: #5.3BM

(1-9 pcs) -  $0.66 each + shipping
(10-99 pcs) - $0.56 + shipping
(100-249 pcs) - $0.46 + shipping
(250+ pcs) - $0.36 + shipping (VIP)

They also fit perfectly in our #4.33BTRAY.

Chula Orchids

Colored Plastic Nursery Pots

Heavy duty pot with a good lip for hanging.


Plastic Nursery Pot - 2.25 Inch Square x 2.5 Inch Tall
Part Number: #AND SQ 225

(1-9 pcs) -  $0.65 each + shipping
(10-99 pcs) - $0.60 + shipping
(100-249 pcs) - $0.40 + shipping
(250+ pcs) - $0.35 + shipping​ (VIP)

​A sturdy pot with 4 holes cut into the side and the bottom.  No lip so labels slide in easily.  Available in green, white, or terra cotta.

This sturdy black pot has a highly effective system of holes and grooves on the bottom of the pot that allows great drainage.


Plastic Nursery Pot - 6.5 Inch Round x 4.25 Inch Tall
Part Number: #JMC 6.5

SOLD OUT

Plastic Nursery Pot - 5.5" Square x 6" deep  

Part Number: #JMC SQ 5.5

(1-9 pcs) -  $1.55 each + shipping
(10+ pcs) - $1.45 + shipping

​​Plastic Nursery Pot - Heavy Duty 5 Inch Round x 5 Inch Tall
Part Number: #JMC 5X5 B

(1-9 pcs) -  $1.20 each + shipping
(10-99 pcs) - $1.10 + shipping
(100-249 pcs) - $0.80 + shipping
(250+ pcs) - $0.75 + shipping (VIP)