The #3.5CLUVEX8 is a sturdy, square pot with great drainage. It is very clear for easy moisture monitoring. These are made with the UV inhibitor so they can be used outside in full sun. These are a little deeper than a normal pot.
Features 8 EXTRA HOLES drilled into the sides. Each hole measures 3/8 of an inch.
Note: Pot is 3 1/2" square and 4" tall.
4 Inch Rand's Aircone
Clear Plastic Orchid Pot with UV Inhibitor
Part Number: #AIRCONE 4
(1-9 pcs) - $4.10 each + shipping
*** Limited Quantities ***
3.5 Inch Clear Plastic Orchid Pot with UV Inhibitor
Part Number: #3.5CLUV
(1-9 pcs) - $1.80 each + shipping
(10-99 pcs) - $1.70 each + shipping
(100-499 pcs) - $0.85 each + shipping
(500+ pcs) - $0.75 each plus shipping (VIP)
The #3CLS is a very popular 3 inch wide clear plastic orchid pots are that is slotted half way up the sides and the bottom with a raised cone center for maximum drainage and air circulation. Pots are flexible, but not flimsy.
Note: Pot is 3" round at the top and 2 3/4" deep.
4 Inch Clear Plastic Slotted Orchid Pot
Part Number: #4 CL S
(1-9 pcs) - $1.38 each + shipping
(10-99 pcs) - $1.28 each + shipping
(100-499 pcs) - $0.63 each + shipping
(500+ pcs) - $0.48 each + shipping (VIP)
Rand's Aircone Pots™ offer increased air and drainage through the internal central cone. These translucent pots allow light to reach the roots and you can visually see the condition and moisture condition of the contents.
These pots are made of heavy duty plastic and are very well designed. They have an internal cone and a sloped bottom that doesn't allow water to sit at the bottom of the pot. These features provide the advantage of vastly improved drainage and increased air circulation over most other plastic orchid pots.
When repotting just wipe with a small amount of bleach mixed with a gallon of water and they will clean up real nice.
2.5 Inch Rand's Aircone
Clear Plastic Orchid Pot with UV Inhibitor
Part Number: #AIRCONE25
(1-9 pcs) - $2.00 each + shipping
Listed in order from smallest to largest diameter measurement
at the top of the pot.
The #3.25NCUVEX8 is a no color flexible orchid pot with no lip and plenty of drainage. This is not a wimpy pot.
UV protection added.
Features 8 EXTRA HOLES drilled into the sides. Each hole measures 3/8 of an inch.
Note: Pot is 3 5/16" square at the top, 3 3/4" high, and 2 1/2" square at the bottom.
The #4 CL S is a very popular 4 inch wide clear plastic orchid pot that is slotted half way up the sides and on the bottom with a raised cone center for maximum drainage and air circulation. Pots are flexible, but not flimsy.
Note: Pot is 4 1/8" in diameter at the top and 3.5" tall.
Rand's Aircone Pots™ offer increased air and drainage through the internal central cone. These translucent pots allow light to reach the roots and you can visually see the condition and moisture condition of the contents.
These pots are made of heavy duty plastic and are very well designed. They have an internal cone and a sloped bottom that doesn't allow water to sit at the bottom of the pot. These features provide the advantage of vastly improved drainage and increased air circulation over most other plastic orchid pots.
When repotting just wipe with a small amount of bleach mixed with a gallon of water and they will clean up real nice.
3 Inch Clear Plastic Slotted Orchid Pot
Part Number: #3CLS
(1-9 pcs) - $1.08 each + shipping
(10-99 pcs) - $0.98 each + shipping
(100-499 pcs) - $0.48 each + shipping
(500+ pcs) - $0.33 + shipping (VIP)
Contact email : excellence@chulaorchids.com
*** Limited Quantities ***
3.25 Inch No Color Plastic Orchid Pot 8 EXTRA HOLES
Part Number: #3.25NCUVEX8
$3.50 each + shipping
Rand's Aircone Pots™ offer increased air and drainage through the internal central cone. These translucent pots allow light to reach the roots and you can visually see the condition and moisture condition of the contents.
These pots are made of heavy duty plastic and are very well designed. They have an internal cone and a sloped bottom that doesn't allow water to sit at the bottom of the pot. These features provide the advantage of vastly improved drainage and increased air circulation over most other plastic orchid pots.
When repotting just wipe with a small amount of bleach mixed with a gallon of water and they will clean up real nice.
Rand's Aircone Pots™ offer increased air and drainage through the internal central cone. These translucent pots allow light to reach the roots and you can visually see the condition and moisture condition of the contents.
These pots are made of heavy duty plastic and are very well designed. They have an internal cone and a sloped bottom that doesn't allow water to sit at the bottom of the pot. These features provide the advantage of vastly improved drainage and increased air circulation over most other plastic orchid pots.
When repotting just wipe with a small amount of bleach mixed with a gallon of water and they will clean up real nice.
Supreme EX 3.5 Inch Clear Plastic Orchid Pot
with UV Inhibitor and 8 EXTRA HOLES
Part Number: #3.5CLUVEX8
$3.75 each + shipping
Chula Orchids
Small Size Clear Plastic Orchid Pots
2 - 4 inch Diameter
The #3.5CLUV is a sturdy, square pot with great drainage. It is very clear for easy moisture monitoring. These are made with the UV inhibitor so they can be used outside in full sun. These are a little deeper than a normal pot.
Note: Pot is 3 1/2" square and 4" tall.
2" Inch Rand's Aircone
Clear Plastic Orchid Pot with UV Inhibitor
Part Number: #AIRCONE2
(1-9 pcs) - $1.75 each + shipping
3 Inch Rand's Aircone
Clear Plastic Orchid Pot with UV Inhibitor
Part Number: #AIRCONE 3
(1-9 pcs) - $2.80 each + shipping