This pot has 8 EXTRA HOLES 5/8 of an inch wide drilled around the side of the pot and one extra in the bottom for not only optimal drainage, but excellent air circulation for the entire pot, a real help when growing orchids.  These pots include the ultraviolet inhibitor, so you can use them outside in full sun if you wish.


This is a strong, heavy duty pot and was made to last.  These pots include the ultraviolet inhibitor, so you can use them outside in full sun if you wish.  This pot has a substantial sturdy lip so you can use any snap on type hanger you want.  I used to know of no clear pot anywhere that would accommodate a large orchid like a Cattleya.  Now when it comes time to repot a Cattleya, Oncidium, or any other large orchid from our smaller pots, we have several of these larger sizes to choose from.  Clean before repotting with an ounce of bleach in a gallon of water.  Rinse and repot.  
Note: Pot is 7.5" diameter at the top and 5.5" deep.  

USA Made

clear plastic orchid pot 4 inch round small extra drainage slots ventilation raised bottom cone
Chula Orchids Home Page

USA Made

clear plastic orchid pot 5.5 inch holes UV McConkey
clear plastic orchid pot 5 inch tall slots holes ventilation large extra holes

4.5 Inch Clear Plastic Pot

with UV Inhibitor and 8 EXTRA HOLES
Part Number: #4.5 CLUV EX8

(1-9 pcs) - $1.30 each + shipping

(10-99 pcs) - $1.25 each + shipping
(100-499 pcs) - $0.95 each + shipping

(500+ pcs) - $0.90 each + shipping

clear plastic orchid pot 3.5 inch square drilled holes small extra drainage ventilation raised bottom
clear plastic orchid pot 5 inch tall slots holes ventilation large extra holes
clear plastic orchid pot 5 inch slots cone holes ventilation large

These clear plastic orchid pots are slotted half way up the sides and the whole bottom with a raised center in the bottom for maximum air circulation.  This pot has no UV inhibitor, but pots are thicker than normal and if used inside will provide years of service.
Note:  Pot is 3" round at the top and 2 3/4" deep.

 2.25 Inch No Color Plastic Orchid Pot
Part Number: #2.25 NC S

(1-9 pcs) - $0.55 each + shipping

(10-99 pcs) - $0.50 each + shipping
(100-499 pcs) - $0.28 each + shipping

(500+ pcs) - $0.23 each + shipping


clear plastic orchid pot 4 inch round small extra drainage slots ventilation raised bottom cone

USA Made

#3.25 NC EX24 with SPST 3.25S

Rand's Aircone Pots clear plastic orchid pot square cone
clear plastic orchid pot 7.5 inch round holes UV McConkey
clear plastic orchid pot 5 inch tall slots holes ventilation large
clear plastic orchid pot 5 inch tall slots holes ventilation large extra holes

This pot has 16 EXTRA HOLES 5/8 of an inch wide drilled around the side of the pot and one extra in the bottom for not only optimal drainage, but excellent air circulation for the entire pot, a real help when growing orchids.  These pots include the ultraviolet inhibitor, so you can use them outside in full sun if you wish.


These 8.5 ultra clear pots are INCREDIBLY sturdy and were made to last.  This pot has a substantial sturdy lip so you can use any snap on type hanger you want.  I used to know of no clear pot anywhere that would accommodate a large orchid like a Cattleya.  Now when it comes time to repot a Cattleya, Oncidium, or any other large orchid from our smaller pots, we have several of these larger sizes to choose from. 
Note: Pot is 8.5" diameter at the top and 6.5" deep.  

This itemhas been replaced in our inventory by the new 6.5" pot found below.

This item is being replaced in our inventory by the new 6.5" pot found below.

#AND 6.5 CLUV with 6 inch orchid saucer

3.25 Inch No Color Plastic Orchid Pot
Part Number: #3.25 NC

(1-9 pcs) - $0.65 each + shipping

(10-99 pcs) - $0.60 each + shipping
(100-499 pcs) - $0.35 each + shipping

​(500+ pcs) - $0.30 each + shipping

clear plastic orchid pot 3.25 inch square slots small extra holes drainage air circulation no color small
ultra clear plastic orchid pot 4.5 inch holes UV Poppelmann Teku
clear plastic orchid pot 3 inch round slots small cone extra drainage air circulation
clear plastic orchid pot 8.5 inch round holes UV McConkey extra holes

USA Made

In a Rand Air Cone pots, air comes in through the slots in the sides and also enters through the cone at the bottom.  This insures more even air flow and helps the center of the plot, generally the hardest spot to get dry, to stay in balance with the rest of the pot.  The lines in the bottom of the pot indicate the bottom is slightly slanted upward to the cone in the middle.  


These are made extra heavy duty for long use and feature added UV protection.  When repotting just wipe with a small amount of bleach mixed with a gallon of water and they will clean up real nice.

clear plastic orchid pot 2.25 inch square slots small

6.5 Inch Clear Plastic Orchid Pot 
with UV Inhibitor and 9 EXTRA HOLES

Part Number: #MC 6.5 CLUV EX9



SOLD OUT



USA Made

clear plastic orchid pot 5.5 inch square holes UV McConkey

​This is a strong, heavy duty pot and was made to last.  This pot has a substantial sturdy lip so you can use any snap on type hanger you want.  I used to know of no clear pot anywhere that would accommodate a large orchid like a Cattleya.  Now when it comes time to repot a Cattleya, Oncidium, or any other large orchid from our smaller pots, we have several of these larger sizes to choose from.
Note: This pot measures 8.5" diameter at the top and is 6.5" deep.

14 x 10 inch clear plastic orchid pot with UV inhibitor McConkey
clear plastic orchid pot 4 inch round small extra drainage slots ventilation raised bottom cone

6.5 Inch Clear Plastic Orchid Pot with UV Inhibitor
Part Number: #MC 6.5 CLUV


​SOLD OUT

clear plastic orchid pot 5 inch tall slots holes ventilation large extra holes

Made in Germany

clear plastic orchid pot 2.25 inch square slots small
extra holes clear plastic orchid pot 2.25 inch square small
clear plastic orchid pot 6 inch round holes UV
ultra clear plastic orchid pot 4.5 inch holes UV Poppelmann Teku
clear plastic orchid pot 6 inch round holes UV
clear plastic orchid pot 3 inch round slots small cone extra drainage air circulation

​This pot has 16 EXTRA HOLES 5/8 of an inch wide drilled around the side of the pot for not only optimal drainage, but excellent air circulation for the entire pot, a real help when growing orchids.

This pot has a substantial sturdy lip so you can use any snap on type hanger you want.  This is a strong, heavy duty pot built to last.  These pots are ultra clear and include the ultraviolet inhibitor, so you can use them outside in full sun if you wish.  Clean before repotting with an ounce of bleach in a gallon of water.  Rinse and repot.  

Note: Pot is 6.5" diameter at the top and 5" deep.  

4 Inch Clear Plastic Slotted Orchid Pot
Part Number: #4 CL S

(1-9 pcs) - $0.80 each + shipping

(10-99 pcs) - $0.75 each + shipping
(100-499 pcs) - $0.50 each + shipping

(500+ pcs) - $0.45 each + shipping

#6 CL with 6 inch orchid saucer

clear plastic orchid pot 5.5 inch holes UV McConkey

USA Made

 2.25 Inch Clear Plastic Orchid Pot with UV Inhibitor
Part Number: #225NCUVS (slots)

(1-9 pcs) - $0.50 each + shipping

(10-99 pcs) - $0.40 each + shipping
(100-499 pcs) - $0.29 each + shipping

(500+ pcs) - $0.25 each + shipping


#4.5 CLUV with 5 inch orchid saucer

​This is a strong, heavy duty pot and was made to last.  These pots include the ultraviolet inhibitor, so you can use them outside in full sun if you wish.  This pot has a substantial sturdy lip so you can use any snap on type hanger you want.  I used to know of no clear pot anywhere that would accommodate a large orchid like a Cattleya.  Now when it comes time to repot a Cattleya, Oncidium, or any other large orchid from our smaller pots, we have several of these larger sizes to choose from.
Note: This pot measures 7.5" diameter at the top and is 5.5" deep.

No color orchid pot with no lip and plenty of drainage.  Features 24 EXTRA HOLES drilled into the sides.  Each hole measures 3/8 of an inch.

Note: Pot is 3 5/16" square at the top, 3 3/4" high, and 2 1/2" square at the bottom.

Drilled in the USA

Drilled in the USA

USA Made

In a Rand Air Cone pots, air comes in through the slots in the sides and also enters through the cone at the bottom.  This insures more even air flow and helps the center of the plot, generally the hardest spot to get dry, to stay in balance with the rest of the pot.  The lines in the bottom of the pot indicate the bottom is slightly slanted upward to the cone in the middle.  


These are made extra heavy duty for long use and feature added UV protection.  When repotting just wipe with a small amount of bleach mixed with a gallon of water and they will clean up real nice.

Widely used in the orchid growing world, these sturdy, tall, clear orchid pots have big drainage holes on the bottom that cut through the bottom and side together.  These pots include the ultra violet inhibitor to make them last longer if exposed to direct sunlight.  These are excellent for Cymbidium and Oncidium type plants.  Note: Pot is 5" in diameter and 5" deep.

3 Inch Clear Plastic Slotted Orchid Pot
Part Number: #3 CL S

(1-9 pcs) - $0.60 each + shipping

(10-99 pcs) - $0.55 each + shipping
(100-499 pcs) - $0.30 each + shipping

(500+ pcs) - $0.25 + shipping

This pot has 16 additional holes drilled into the side.  Each hole measures 1/2 of an inch.  These are beautiful pots and almost as clear as glass.  This round clear pot has legs on the bottom that allow for better circulation and plenty of drainage.  Also has a neat cone in the bottom to further enhance air circulation, providing complete drainage for the center of the mix.  

clear plastic orchid pot 7.5 inch round holes UV McConkey extra holes

5.5 inch x 4.25 Inch Clear Plastic Orchid Pot with UV Inhibitor
Part Number: #5.5 CLUV

(1-9 pcs) - $1.10 each + shipping

(10-99 pcs) - $1.00 each + shipping
(100-249 pcs) - $0.70 each + shipping

(250+ pcs) - $0.65 each + shipping

USA Made

 4 Inch Rand's Aircone

Clear Plastic Orchid Pot with UV Inhibitor
Part Number: #AIRCONE 4

(1-5 pcs) - $2.15 each + shipping

(6-24 pcs) - $2.00 each + shipping
(25-49 pcs) - $1.75 each + shipping

(50+ pcs) - $1.60 each + shipping

ultra clear plastic orchid pot 4.5 inch holes UV Poppelmann Teku extra holes

USA Made

 2.25 Inch Clear Plastic Orchid Pot with UV Inhibitor
Part Number: #2.25 CLUV H

(1-9 pcs) - $0.55 each + shipping

(10-99 pcs) - $0.50 each + shipping
(100-499 pcs) - $0.28 each + shipping

(500+ pcs) - $0.23 each + shipping

USA Made

​This 5" round slotted pot has a tapered riser in the bottom of the pot about 4" in diameter and 1/2" high with slots on the sides of the taper to assist air circulation. 
Note: Pot is 5" in diameter at the top and 4.5" tall.

​This pot has 8 EXTRA HOLES 5/8 of an inch wide drilled around the side of the pot and one in the bottom for not only optimal drainage, but excellent air circulation for the entire pot, a real help when growing orchids.  This pot has a substantial sturdy lip so you can use any snap on type hanger you want.  This is a strong, heavy duty pot built to last.  These pots include the ultraviolet inhibitor, so you can use them outside in full sun if you wish.  Clean before repotting with an ounce of bleach in a gallon of water.  Rinse and repot.  
Note: Pot is 6.5" diameter at the top and 5" deep.  

This is a strong, heavy duty pot and was made to last.  These pots are ultra clear and include the ultraviolet inhibitor, so you can use them outside in full sun if you wish.  This pot has a substantial sturdy lip so you can use any snap on type hanger you want.    Clean before repotting with an ounce of bleach in a gallon of water.  Rinse and repot.  
Note: Pot is 6.5" diameter at the top and 5" deep.  

clear plastic orchid pot 8.5 inch round holes UV McConkey
clear plastic orchid pot 5 inch tall slots holes ventilation large extra holes

5 x 5 Inch Clear Plastic Orchid Pot

with UV Inhibitor with 9 EXTRA HOLES
Part Number: #5x5 CLUV EX9

(1-9 pcs) - $1.60 each + shipping

(10-99 pcs) - $1.50 each + shipping
(100-249 pcs) - $1.20 each + shipping

(250+ pcs) - $1.15 each + shipping

USA Made

#5x5 CLUV with 5 inch orchid saucer

This pot features 24 EXTRA HOLES drilled into the sides.  Each hole measures 1/4 of an inch.  These sturdy little pots are useful for just about anything including vegetables.  This pot features a raised bottom with slots to give more space allowing water out and air in from below. 
Note: Pot is 2 1/4" square at the top, 3 3/16" high and 1 13/16" square at the bottom.

USA Made

6.5 Inch Clear Plastic Orchid Pot 
with UV Inhibitor and 8 EXTRA HOLES

Part Number: #AND 6.5 CLUV EX8
(1-5 pcs) - $2.35 each + shipping
(6-99 pcs) - $2.20 each + shipping
(100-199 pcs) - $1.60 each + shipping

(200+ pcs) - $1.55 each + shipping


USA Made

clear plastic orchid pot 7.5 inch round holes UV McConkey extra holes
clear plastic orchid pot 3.25 inch square slots small extra drainage air circulation no color
clear plastic orchid pot 5 inch slots cone holes ventilation large

USA Made

USA Made

extra holes clear plastic orchid pot 2.25 inch square small

#6 CL with 6 inch orchid saucer

clear plastic orchid pot 3.5 inch square drilled holes small extra drainage ventilation raised bottom

This pot has 16 EXTRA HOLES 5/8 of an inch wide drilled around the side of the pot and one extra in the bottom for not only optimal drainage, but excellent air circulation for the entire pot, a real help when growing orchids.  These pots include the ultraviolet inhibitor, so you can use them outside in full sun if you wish.


This is a strong, heavy duty pot and was made to last.  These pots include the ultraviolet inhibitor, so you can use them outside in full sun if you wish.  This pot has a substantial sturdy lip so you can use any snap on type hanger you want.  I used to know of no clear pot anywhere that would accommodate a large orchid like a Cattleya.  Now when it comes time to repot a Cattleya, Oncidium, or any other large orchid from our smaller pots, we have several of these larger sizes to choose from.  Clean before repotting with an ounce of bleach in a gallon of water.  Rinse and repot.  
Note: Pot is 7.5" diameter at the top and 5.5" deep.  

clear plastic orchid pot 7.5 inch round holes UV McConkey

#3.5 CLUV with 5 inch orchid saucer

5 x 5 Inch Clear Plastic Orchid Pot

with UV Inhibitor with 17 EXTRA HOLES
Part Number: #5x5 CLUV EX17

(1-9 pcs) - $1.90 each + shipping

(10-99 pcs) - $1.80 each + shipping
(100-249 pcs) - $1.50 each + shipping

(250+ pcs) - $1.45 each + shipping

extra holes clear plastic orchid pot 2.25 inch square slots small

USA Made

USA Made

Rand's Aircone clear plastic orchid pot square cone

3.25 Inch No Color Plastic Orchid Pot 24 EXTRA HOLES
Part Number: #3.25 NC EX24

(1-9 pcs) - $1.10 each + shipping

(10-99 pcs) - $1.05 each + shipping
(100-499 pcs) - $0.80 each + shipping

​(500+ pcs) - $0.75 each + shipping

extra holes clear plastic orchid pot 2.25 inch square small

#5x5 CLUV with 5 inch orchid saucer

This pot has 8 EXTRA HOLES 5/8 of an inch wide drilled around the side of the pot and one extra in the bottom for not only optimal drainage, but excellent air circulation for the entire pot, a real help when growing orchids.​  Widely used in the orchid growing world, these sturdy, tall, clear orchid pots have big drainage holes on the bottom that cut through the bottom and side together.  These pots include the ultra violet inhibitor to make them last longer if exposed to direct sunlight.  These are excellent for Cymbidium and Oncidium type plants.
Note: Pot is 5" in diameter and 5" deep.

clear plastic orchid pot 6.5 inch round holes UV McConkey

USA Made

#5x5 CLUV with 5 inch orchid saucer

clear plastic orchid pot 4 inch round small extra drainage slots ventilation raised bottom cone
extra holes clear plastic orchid pot 2.25 inch square small

Excellent drainage and circulation in this clear orchid pot.  It has 11 holes in the bottom and a raised interior platform about 3/8 of an inch high.  Excellent for Oncidiums and their complex hybrids.
Note:  Pot measures 6" diameter at the top and 5.5" deep.

clear plastic orchid pot 8.5 inch round holes UV McConkey

​​This 4" round slotted pot has a tapered riser in the bottom of the pot about 1 1/2" in diameter and 5/8" high with slots on the sides of the taper to assist air circulation. 
Note: Pot is 4 1/8" in diameter at the top and 3.5" tall.

Bringing this items to market did take a lot of persuading, $$$, storage, and good effort by a lot of people, but this large no color plastic orchid pot was made to last!  

14 inch diameter and 10 inches deep, this is a heavy duty, sturdy no color pot.  These are great for growing large plants, especially orchids in the specimen sizes.  Cymbidiums, Cattleyas, Phals, Dendrobiums, Epidendrums, Oncidiums and the like will especially like the strong heavy pot to hold them upright.  

Note: This pot measures 14" diameter by 10" deep.

Rand's Aircone Pots clear plastic orchid pot square cone

No color orchid pot with no lip and plenty of drainage.

Note: Pot is 3 5/16" square at the top, 3 3/4" high, and 2 1/2" square at the bottom.

clear plastic orchid pot 2.25 inch square holes small

USA Made

This pot has 8 EXTRA HOLES 5/8 of an inch wide drilled around the side of the pot and one extra in the bottom for not only optimal drainage, but excellent air circulation for the entire pot, a real help when growing orchids.  These pots include the ultraviolet inhibitor, so you can use them outside in full sun if you wish.


These 8.5 ultra clear pots are incredibly sturdy and were made to last.  This pot has a substantial sturdy lip so you can use any snap on type hanger you want.  I used to know of no clear pot anywhere that would accommodate a large orchid like a Cattleya.  Now when it comes time to repot a Cattleya, Oncidium, or any other large orchid from our smaller pots, we have several of these larger sizes to choose from. 
Note: Pot is 8.5" diameter at the top and 6.5" deep.  

clear plastic orchid pot 8.5 inch round holes UV McConkey extra holes
clear plastic orchid pot 5 inch tall slots holes ventilation large

5.0 Inch Clear Plastic Slotted Orchid Pot
Part Number: #5 CL S

(1-9 pcs) - $1.00 each + shipping

(10-99 pcs) - $0.90 each + shipping
(100-499 pcs) - $0.60 each + shipping

(500+ pcs) - $0.55 each + shipping

clear plastic orchid pot 5 inch slots cone holes ventilation large
Rand's Aircone Pots clear plastic orchid pot square cone large small

USA Made

This pot has 8 EXTRA HOLES 5/8 of an inch wide drilled around the side of the pot for not only optimal drainage, but excellent air circulation for the entire pot, a real help when growing orchids.  The bottom features 11 holes and a raised interior platform about 3/8 of an inch high.  Excellent for Oncidiums and their complex hybrids.  These are not wimpy pots.  These are sturdy enough for lip hangers and 3 or 4 wire hangers. 


Note: Pot measures 6" outside diameter at the top, 4.5" outside diameter at the bottom, and 5.5" deep.

5 x 5 Inch Clear Plastic Orchid Pot with UV Inhibitor
Part Number: #5x5 CLUV

(1-9 pcs) - $1.05 each + shipping

(10-99 pcs) - $0.95 each + shipping
(100-249 pcs) - $0.65 each + shipping

(250 pcs+ pcs) - $0.60 each + shipping

8.5 Inch Clear Plastic Orchid Pot

with UV Inhibitor and 17 EXTRA HOLES
Part Number: #8.5 CLUV EX17
(1-5 pcs) - $3.70 each + shipping
(6-49 pcs) - $3.45 each + shipping
(50-99 pcs) - $2.75 each + shipping

(100+ pcs) - $2.70 each + shipping

extra holes clear plastic orchid pot 2.25 inch square slots small

5 Inch Square x 6 Inch Deep Clear Plastic Orchid Pot

with UV Inhibitor (Limited Supply)
Part Number: #SQGNCUV
(1-5 pcs) - $1.35 each + shipping

(5-99 pcs) - $1.25 each + shipping
(100-199 pcs) - $0.80 each + shipping

(200+ pcs) - $0.75 each + shipping

#5 CLS with 5 inch orchid saucer

clear plastic orchid pot 7.5 inch round holes UV McConkey extra holes
clear plastic orchid pot 2.25 inch square holes small

USA Made

#4.5 CLUV with 5 inch orchid saucer

3.5 Inch Clear Plastic Orchid Pot with UV Inhibitor
Part Number: #3.5 CLUV

(1-9 pcs) - $0.70 each + shipping

(10-99 pcs) - $0.56 each + shipping
(100-499 pcs) - $0.40 each + shipping

(500+ pcs) - $0.35 each plus shipping


clear plastic orchid pot 8.5 inch round holes UV McConkey extra holes

#5.5 CLUV with 6 inch orchid saucer

#7.5 CLUV with 6 inch orchid saucer

clear plastic orchid pot 3 inch round slots small cone extra drainage air circulation

Made in Germany

clear plastic orchid pot 5 inch tall slots holes ventilation large extra holes

4.5 Inch Clear Plastic Pot with UV Inhibitor
Part Number: #4.5 CLUV

(1-9 pcs) - $0.80 each + shipping

(10-99 pcs) - $0.75 each + shipping
(100-499 pcs) - $0.45 each + shipping

(500+ pcs) - $0.40 each + shipping

 6 Inch Rand's Aircone

Clear Plastic Orchid Pot with UV Inhibitor
Part Number: #AIRCONE 6

(1-5 pcs) - $3.25 each + shipping

(6-24 pcs) - $3.10 each + shipping
(25-49 pcs) - $2.85 each + shipping

(50+ pcs) - $2.70 + shipping

6.0 Inch Clear Plastic Orchid Pot with EXTRA HOLES
Part Number: #6 CL EX16
(1-5 pcs) - $2.30 each + shipping
(6-99) - $2.20 each + shipping
(100-199 pcs) - $1.80 each + shipping

(200 pcs) - $1.75 each + shipping

#4.5 CLUV with 5 inch orchid saucer

clear plastic orchid pot 7.5 inch round holes UV McConkey extra holes
clear plastic orchid pot 5 inch tall slots holes ventilation large
clear plastic orchid pot 3.5 inch square drilled holes small extra drainage ventilation raised bottom
clear plastic orchid pot 6.5 inch round holes UV McConkey

Sturdy pot with a good lip made with ultra violet inhibitor so you can use them outside in full sun if you wish.

​Note: Pot is 5.5 inches diameter and 4.25 inches deep.

extra holes clear plastic orchid pot 2.25 inch square slots small
clear plastic orchid pot 3.25 inch square slots small extra drainage air circulation no color
Rand's Aircone clear plastic orchid pot square cone
clear plastic orchid pot 5.5 inch holes UV McConkey extra holes
ultra clear plastic orchid pot 4.5 inch holes UV Poppelmann Teku extra holes

USA Made

clear plastic orchid pot 5 inch slots cone holes ventilation large
clear plastic orchid pot 5 inch tall slots holes ventilation large

Made in Germany

Very popular pots include the ultraviolet inhibitor, so you can use them outside in full sun if you wish.  This is one of our few square clear plastic orchid pots.  Because of its unique shape and added height, this pot holds more than either the 6.0NCUV or even the 6.5NCUV pots as you can see in the picture below.

This pot has 8 EXTRA HOLES 5/8 of an inch wide drilled around the side of the pot and one extra in the bottom for not only optimal drainage, but excellent air circulation for the entire pot, a real help when growing orchids.  These pots include the ultraviolet inhibitor, so you can use them outside in full sun if you wish.


This is a strong, heavy duty pot and was made to last.  This pot has a substantial sturdy lip so you can use any snap on type hanger you want.  I used to know of no clear pot anywhere that would accommodate a large orchid like a Cattleya.  Now when it comes time to repot a Cattleya, Oncidium, or any other large orchid from our smaller pots, we have several of these larger sizes to choose from.  Clean before repotting with an ounce of bleach in a gallon of water.  Rinse and repot.  
Note: Pot is 8.5" diameter at the top and 6.5" deep.  

clear plastic orchid pot 6.5 inch round holes UV McConkey

In a Rand Air Cone pots, air comes in through the slots in the sides and also enters through the cone at the bottom.  This insures more even air flow and helps the center of the plot, generally the hardest spot to get dry, to stay in balance with the rest of the pot.  The lines in the bottom of the pot indicate the bottom is slightly slanted upward to the cone in the middle.  


These are made extra heavy duty for long use and feature added UV protection.  When repotting just wipe with a small amount of bleach mixed with a gallon of water and they will clean up real nice.

clear plastic orchid pot 5.5 inch holes UV McConkey
extra holes clear plastic orchid pot 2.25 inch square slots small

USA Made

These 8.5 ultra clear pots are incredibly sturdy and were made to last.  This pot has a substantial sturdy lip so you can use any snap on type hanger you want.  I used to know of no clear pot anywhere that would accommodate a large orchid like a Cattleya.  Now when it comes time to repot a Cattleya, Oncidium, or any other large orchid from our smaller pots, we have several of these larger sizes to choose from.
Note: This pot measures 8.5" diameter at the top and is 6.5" deep.

USA Made

USA Made

clear plastic orchid pot 5 inch tall slots holes ventilation large extra holes

​This pot has 13 EXTRA HOLES 1/2 of an inch wide drilled around the side of the pot and one extra in the bottom for not only optimal drainage, but excellent air circulation for the entire pot, a real help when growing orchids.  These pots include the ultraviolet inhibitor, so you can use them outside in full sun if you wish.

This pot has a substantial sturdy lip so you can use any snap on type hanger you want.  This is a strong, heavy duty pot built to last.  Clean before repotting with an ounce of bleach in a gallon of water.  Rinse and repot.  
Note: Pot is 5.5 inches diameter at the top and 4.25 inches deep.  

5.5 inch x 4.25 inch Clear Plast Orchid Pot 
with UV inhibitor and 13 EXTRA HOLES

Part Number: #5.5 CLUV EX13

(1-9 pcs) - $1.85 each + shipping

(10-99 pcs) - $1.75 each + shipping
(100-249 pcs) - $1.45 each + shipping

(250+ pcs) - $1.40 each plus shipping 

3.5 Inch Clear Plastic Orchid Pot

with UV Inhibitor and 24 EXTRA HOLES
Part Number: #3.5 CLUV EX24

(1-9 pcs) - $1.15 each + shipping

(10-99 pcs) - $1.10 each + shipping
(100-499 pcs) - $0.83 each + shipping

(500+ pcs) - $0.78 each plus shipping


6.0 Inch Clear Plastic Orchid Pot
Part Number: #6 CL

(1-5 pcs) - $1.30 each + shipping

(6-99) - $1.20 each + shipping
(100-199 pcs) - $0.80 each + shipping

(200+ pcs) - $0.75 each + shipping

 2.5 Inch Rand's Aircone

Clear Plastic Orchid Pot with UV Inhibitor
Part Number: #AIRCONE 2.5 

(1-5 pcs) - $1.12 each + shipping

(6-49 pcs) - $1.06 each + shipping
(50-99 pcs) - $0.96 each + shipping

(100+ pcs) - $0.90 each + shipping


14 Inch x 10 Inch No Color Pot
Part Number: #14X10 NC
$10.00 each + shipping
LIMITED QUANTITIES.


clear plastic orchid pot 3.5 inch square holes small extra drainage ventilation raised bottom
Rand's Aircone Pots clear plastic orchid pot square cone large small

This itemhas been replaced in our inventory by the new 6.5" pot found below.

 3 Inch Rand's Aircone

Clear Plastic Orchid Pot with UV Inhibitor
Part Number: #AIRCONE 3

(1-5 pcs) - $1.25 each + shipping

(6-49 pcs) - $1.18 each + shipping
(50-99 pcs) - $1.06 each + shipping

​(100+) - $1.00 each plus shipping

USA Made

8.5 Inch No Color Plastic Orchid Pot with 9 EXTRA HOLES
Part Number: #FAR 8.5 NC EX9
(1-5 pcs) - $3.15 each + shipping
(6-49 pcs) - $2.80 each + shipping
(50-99 pcs) - $2.15 each + shipping

(100+ pcs) - $2.10 each + shipping


Great drainage on this popular pot.  It is very clear for easy moisture monitoring.  Features 8 EXTRA HOLES drilled into the sides.  Each hole measures 3/8 of an inch.  These are made with the UV inhibitor so they can be used outside in full sun.  These are a little deeper than a normal pot.  Note: Pot is 3 1/2" square and 4" tall.​

#4 CL S with 5 inch orchid saucer

#7.5 CLUV with 6 inch orchid saucer

8.5 Inch No Color Plastic Orchid Pot
Part Number: #FAR 8.5 NC
(1-5 pcs) - $2.45 each + shipping
(6-49 pcs) - $2.10 each + shipping
(50-99 pcs) - $1.45 each + shipping

(100+ pcs) - $1.40 each + shipping


Clear Plastic Orchid Pots

8.5 Inch Clear Plastic Orchid Pot with UV Inhibitor
Part Number: #8.5 CLUV
(1-5 pcs) - $2.60 each + shipping
(6-49 pcs) - $2.35 each + shipping
(50-99 pcs) - $1.65 each + shipping

(100+ pcs) - $1.60 each + shipping


This picture shows HOW MUCH MORE the square 5.5 pot holds than either the round 6.0 (on the left) or the round 6.5 (on the right).  I filled each of these two square pots with mix.  Then used the mix in one pot to completely fill the 6.0NCUV and the other pot to completely fill the 6.5NCUV.  What you see remaining in the square pots is how much more mix they hold.

clear plastic orchid pot 7.5 inch round holes UV McConkey

#5.5 CLUV with 6 inch orchid saucer

​This pot has 8 EXTRA HOLES 5/8 of an inch wide drilled around the side of the pot for not only optimal drainage, but excellent air circulation for the entire pot, a real help when growing orchids.  This pot has a substantial sturdy lip so you can use any snap on type hanger you want.  This is a strong, heavy duty pot built to last.  These pots are ultra clear and include the ultraviolet inhibitor, so you can use them outside in full sun if you wish.  Clean before repotting with an ounce of bleach in a gallon of water.  Rinse and repot.  
Note: Pot is 6.5" diameter at the top and 5" deep.  

#3.25 NC with SPST 3.25S

clear plastic orchid pot 2.25 inch square slots small

#3 CL S with 5 inch orchid saucer

clear plastic orchid pot 6.5 inch round holes UV McConkey

USA Made

#5.5 CLUV with 6 inch orchid saucer

In a Rand Air Cone pots, air comes in through the slots in the sides and also enters through the cone at the bottom.  This insures more even air flow and helps the center of the plot, generally the hardest spot to get dry, to stay in balance with the rest of the pot.  The lines in the bottom of the pot indicate the bottom is slightly slanted upward to the cone in the middle.  


These are made extra heavy duty for long use and feature added UV protection.  When repotting just wipe with a small amount of bleach mixed with a gallon of water and they will clean up real nice.

USA Made

square clear plastic orchid pot with UV inhibitor McConkey comparison
ultra clear plastic orchid pot 4.5 inch holes UV Poppelmann Teku

5.5 inch x 4.25 inch Clear Plast Orchid Pot 
with UV inhibitor and 9 EXTRA HOLES

Part Number: #5.5 CLUV EX9

(1-9 pcs) - $1.70 each + shipping

(10-99 pcs) - $1.60 each + shipping
(100-249 pcs) - $1.30 each + shipping

(250+ pcs) - $1.25 each plus shipping 

Rand's Aircone clear plastic orchid pot square cone small large
clear plastic orchid pot 3.25 inch square slots small extra holes drainage air circulation no color small
clear plastic orchid pot 5.5 inch square holes UV McConkey
Rand's Aircone Pots clear plastic orchid pot square cone

In a Rand Air Cone pots, air comes in through the slots in the sides and also enters through the cone at the bottom.  This insures more even air flow and helps the center of the plot, generally the hardest spot to get dry, to stay in balance with the rest of the pot.  The lines in the bottom of the pot indicate the bottom is slightly slanted upward to the cone in the middle.  


These are made extra heavy duty for long use and feature added UV protection.  When repotting just wipe with a small amount of bleach mixed with a gallon of water and they will clean up real nice.

Rand's Aircone clear plastic orchid pot square cone large small

Great drainage on this popular pot.  It is very clear for easy moisture monitoring.  These are made with the UV inhibitor so they can be used outside in full sun.  These are a little deeper than a normal pot.
Note: Pot is 3 1/2" square and 4" tall.

clear plastic orchid pot 6 inch round holes UV
clear plastic orchid pot 2.25 inch square holes small
clear plastic orchid pot 5.5 inch square holes UV McConkey
Rand's Aircone clear plastic orchid pot square cone small large

This pot has 8 EXTRA HOLES 1/2 of an inch wide drilled around the side of the pot and one extra in the bottom for not only optimal drainage, but excellent air circulation for the entire pot, a real help when growing orchids.​  Widely used in the orchid growing world, these sturdy, tall, clear orchid pots have big drainage holes on the bottom that cut through the bottom and side together.  These pots include the ultra violet inhibitor to make them last longer if exposed to direct sunlight.  These are excellent for Cymbidium and Oncidium type plants.
Note: Pot is 5" in diameter and 5" deep.

​This pot has 8 EXTRA HOLES 5/8 of an inch wide drilled around the side of the pot and one extra in the bottom for not only optimal drainage, but excellent air circulation for the entire pot, a real help when growing orchids.  These pots include the ultraviolet inhibitor, so you can use them outside in full sun if you wish.

This pot has a substantial sturdy lip so you can use any snap on type hanger you want.  This is a strong, heavy duty pot built to last.  Clean before repotting with an ounce of bleach in a gallon of water.  Rinse and repot.  
Note: Pot is 5.5 inches diameter at the top and 4.25 inches deep.  

ultra clear plastic orchid pot 4.5 inch holes UV Poppelmann Teku extra holes
clear plastic orchid pot 5.5 inch holes UV McConkey extra holes
Rand's Aircone Pots clear plastic orchid pot square cone
clear plastic orchid pot 5.5 inch holes UV McConkey extra holes

 2" Inch Rand's Aircone

Clear Plastic Orchid Pot with UV Inhibitor
Part Number: #AIRCONE 2

(1-5 pcs) - $1.00 each + shipping

(6-49 pcs) - $0.94 each + shipping
(50-99 pcs) - $0.86 each + shipping

(100+ pcs) - $0.80 each + shipping

Rand's Aircone clear plastic orchid pot square cone large small

 5 Inch Rand's Aircone

Clear Plastic Orchid Pot with UV Inhibitor
Part Number: #AIRCONE 5

(1-5 pcs) - $2.90 each + shipping

(6-24 pcs) - $2.70 each + shipping
(50-49 pcs) - $2.50 each + shipping

(50+ pcs) - $2.35 each + shipping

clear plastic orchid pot 3.25 inch square slots small extra holes drainage air circulation no color small
clear plastic orchid pot 3 inch round slots small cone extra drainage air circulation
clear plastic orchid pot 2.25 inch square holes small
clear plastic orchid pot 5.5 inch holes UV McConkey extra holes
Chula Orchids Home Page

Shipping Discounts begin at $150 worth of merchandise.  Click here to read our shipping discount policy.

Merchandise


clear plastic orchid pot 2.25 inch square slots small
clear plastic orchid pot 7.5 inch round holes UV McConkey

#6 CL with 6 inch orchid saucer

USA Made

clear plastic orchid pot 6 inch round holes UV

This item is being replaced in our inventory by the new 6.5" pot found below.

USA Made

clear plastic orchid pot 3.5 inch square holes small extra drainage ventilation raised bottom

These sturdy little pots are useful for just about anything including vegetables.  This pot features a raised bottom with slots to give more space allowing water out and air in from below. 
Note: Pot is 2 1/4" square at the top, 3 3/16" high and 1 13/16" square at the bottom.

6.5 Inch Clear Plastic Orchid Pot with UV Inhibitor
Part Number: #AND 6.5 CLUV
(1-5 pcs) - $1.65 each + shipping
(6-99 pcs) - $1.50 each + shipping
(100-199 pcs) - $0.90 each + shipping

(200+ pcs) - $0.85 each plus shipping

USA Made

This pot has 8 additional holes drilled into the side.  Each hole measures 1/2 of an inch.  These are beautiful pots and almost as clear as glass.  This round clear pot has legs on the bottom that allow for better circulation and plenty of drainage.  Also has a neat cone in the bottom to further enhance air circulation, providing complete drainage for the center of the mix.  
Note: Pot is 4 1/2" in diameter at the top and 4 1/8" tall.

USA Made

clear plastic orchid pot 5.5 inch holes UV McConkey
clear plastic orchid pot 3.25 inch square slots small extra drainage air circulation no color
Chula Orchids To Order

Other Features

Chula Orchids clear plastic pots
clear plastic orchid pot 3.5 inch square holes small extra drainage ventilation raised bottom

This is a strong, heavy duty pot and was made to last.  These pots include the ultraviolet inhibitor, so you can use them outside in full sun if you wish.  This pot has a substantial sturdy lip so you can use any snap on type hanger you want.    Clean before repotting with an ounce of bleach in a gallon of water.  Rinse and repot.  
Note: Pot is 6.5" diameter at the top and 5" deep.  

clear plastic orchid pot 5 inch tall slots holes ventilation large extra holes
clear plastic orchid pot 3.5 inch square holes small extra drainage ventilation raised bottom

#AND 6.5 CLUV with 6 inch orchid saucer

#7.5 CLUV with 6 inch orchid saucer

ultra clear plastic orchid pot 4.5 inch holes UV Poppelmann Teku extra holes
ultra clear plastic orchid pot 4.5 inch holes UV Poppelmann Teku
clear plastic orchid pot 3.25 inch square slots small extra drainage air circulation no color

USA Made

USA Made

This round clear pot has legs on the bottom that allow for better circulation and plenty of drainage.  Also has a neat cone in the bottom to further enhance air circulation, providing complete drainage for the center of the mix.  These are beautiful pots and almost as clear as glass.
Note: Pot is 4 1/2" in diameter at the top and 4 1/8" tall.

 2.25 Inch No Color Plastic Orchid Pot 24 EXTRA HOLES
Part Number: #2.25 NC S EX24

(1-9 pcs) - $1.00 each + shipping

(10-99 pcs) - $0.95 each + shipping
(100-499 pcs) - $0.73 each + shipping

(500+ pcs) - $0.68 each + shipping


Chula Orchids To Order

8.5 Inch Clear Plastic Orchid Pot

with UV Inhibitor and 9 EXTRA HOLES
Part Number: #8.5 CLUV EX9
(1-5 pcs) - $3.35 each + shipping
(6-49 pcs) - $3.10 each + shipping
(50-99 pcs) - $2.40 each + shipping

(100+ pcs) - $2.35 each + shipping

7.5 Inch Clear Plastic Orchid Pot

with UV inhibitor and 9 EXTRA HOLES
Part Number: #7.5 CLUV EX9

(1-5 pcs) - $2.95 each + shipping

(6-49 pcs) - $2.75 each + shipping
(50-99 pcs) - $2.10 each + shipping

(100+ pcs) - $2.05 each + shipping

clear plastic orchid pot 8.5 inch round holes UV McConkey

In a Rand Air Cone pots, air comes in through the slots in the sides and also enters through the cone at the bottom.  This insures more even air flow and helps the center of the plot, generally the hardest spot to get dry, to stay in balance with the rest of the pot.  The lines in the bottom of the pot indicate the bottom is slightly slanted upward to the cone in the middle.  


These are made extra heavy duty for long use and feature added UV protection.  When repotting just wipe with a small amount of bleach mixed with a gallon of water and they will clean up real nice.

This pot features 24 EXTRA HOLES drilled into the sides.  Each hole measures 1/4 of an inch.  These sturdy little pots are useful for just about anything including vegetables.  This pot features a raised bottom with holes to give more space allowing water out and air in from below.  Also includes added UV protection.
Note: Pot is 2 1/4" square at the top, 3 3/16" high and 1 13/16" square at the bottom.

 2.25 Inch Clear Plastic Orchid Pot

with UV Inhibitor and 24 EXTRA HOLES
Part Number: #2.25 CLUV H EX24

(1-9 pcs) - $1.00 each + shipping

(10-99 pcs) - $0.95 each + shipping
(100-499 pcs) - $0.73 each + shipping

(500+ pcs) - $0.68 each + shipping

clear plastic orchid pot 3.5 inch square drilled holes small extra drainage ventilation raised bottom

3.5 Inch Clear Plastic Orchid Pot with UV Inhibitor
Part Number: #3.5 CLUV

(1-9 pcs) - $0.70 each + shipping

(10-99 pcs) - $0.65 each + shipping
(100-499 pcs) - $0.38 each + shipping

(500+ pcs) - $0.33 each plus shipping


6.0 Inch Clear Plastic Orchid Pot with EXTRA HOLES
Part Number: #6 CL EX8
(1-5 pcs) - $2.00 each + shipping
(6-99) - $1.90 each + shipping
(100-199 pcs) - $1.50 each + shipping

(200 pcs) - $1.45 each + shipping

USA Made

These sturdy little pots are useful for just about anything including vegetables.  This pot features a raised bottom with holes to give more space allowing water out and air in from below.  Also includes added UV protection. 
Note: Pot is 2 1/4" square at the top, 3 3/16" high and 1 13/16" square at the bottom.

clear plastic orchid pot 3.25 inch square slots small extra holes drainage air circulation no color small

7.5 Inch Clear Plastic Orchid Pot with UV inhibitor
Part Number: #7.5 CLUV

(1-5 pcs) - $2.25 each + shipping

(6-49 pcs) - $2.05 each + shipping
(50-99 pcs) - $1.40 each + shipping

(100+ pcs) - $1.35 each + shipping

​​This pot has 16 EXTRA HOLES 1/2 of an inch wide drilled around the side of the pot for not only optimal drainage, but excellent air circulation for the entire pot, a real help when growing orchids.  The bottom features 11 holes and a raised interior platform about 3/8 of an inch high.  Excellent for Oncidiums and their complex hybrids.  These are not wimpy pots.  These are sturdy enough for lip hangers and 3 or 4 wire hangers. 


Note: Pot measures 6" outside diameter at the top, 4.5" outside diameter at the bottom, and 5.5" deep.

6.5 Inch Clear Plastic Orchid Pot 
with UV Inhibitor and 16 EXTRA HOLES

Part Number: #AND 6.5 CLUV EX16
(1-5 pcs) - $2.65 each + shipping
(6-99 pcs) - $2.50 each + shipping
(100-199 pcs) - $1.90 each + shipping

(200+ pcs) - $1.85 each + shipping


#3.5 CLUV with 5 inch orchid saucer

4.5 Inch Clear Plastic Pot

with UV Inhibitor and 16 EXTRA HOLES
Part Number: #4.5 CLUV EX16

(1-9 pcs) - $1.50 each + shipping

(10-99 pcs) - $1.45 each + shipping
(100-499 pcs) - $1.15 each + shipping

(500+ pcs) - $1.10 each + shipping

7.5 Inch Clear Plastic Orchid Pot

with UV inhibitor and 17 EXTRA HOLES
Part Number: #7.5 CLUV EX17

(1-5 pcs) - $3.25 each + shipping

(6-49 pcs) - $3.05 each + shipping
(50-99 pcs) - $2.40 each + shipping

(100+ pcs) - $2.35 each + shipping

Listed in order from smallest to largest diameter measurement at the top of the pot.

#AND 6.5 CLUV with 6 inch orchid saucer

USA Made