You have the option of buying these rubber tips for your Vinyl Coated Steel Plant Stakes. They are a good safety precaution as getting stuck with one of these sturdy plant stakes in the eye would be quite painful. Not everyone wants them however, that is why we sell them separately. Available in green or brown.
Extra Thick
Vinyl Coated Steel Plant Stakes - 11 Gauge Wire
Hand Cut (11 Gauge Wire)
9"-10" stakes available in brown or light green #VCSPS10
10" (1-9 pcs) $0.60 each
10" (10-49 pcs) $0.50 each
10" (50+ pcs) $0.40 each (VIP)
Hand Cut (11 Gauge Wire)
14"-15" stakes available in brown or light green #VCSPS15
15" (1-5 pcs) $0.75 each
15" (10-49 pcs) $0.60 each
15" (50+ pcs) $0.50 each (VIP)
(11 Gauge Wire)
30" stakes available in brown or light green #VCSPS30
30" (1-9 pcs) $1.10 each
30" (10-49 pcs) $0.90 each
30" (50-99 pcs) $0.70 each
30" (100-499 pcs) $0.55 each (VIP)
30" (Case of 500 pcs) - $225 ($0.45 each)
Note: Prices above do not include shipping.
Cases must ship separately from other items.
Rubber Tips for 12 Gauge Wire
Part Number: #TIPS
(1-9) - $0.05 each plus shipping
(10-99) -$0.04 each plus shipping
(100-499) - $0.03 each plus shipping
(500+) -$0.02 each plus shipping (VIP)
These heavy duty steel 4 wire hangers are perfect for any type of hanging basket. They are super strong and can hold a lot of weight. These are long lasting an do not rust. The wires are zinc plated to prevent rust. Don't settle for any weaker options. These heavy duty steel wire hangers will not disappoint.
The large hook on the top will fit over nails, screws, or even 1 1/2 inch pipe. The hanger is about 24 inches long when used this way, but if you straighten out the hook and use the loop on the end for hanging from a nail or screw you can extend it to about 27 inches.
If you need 4 wires, these hangers have them. If you have a basket that only needs three wires for hanging, just snip off one of the wires and save it. You never know when you might need a nice piece of zinc plated steel wire.
Contact email : excellence@chulaorchids.com
Thick
Vinyl Coated Steel Plant Stakes - 12 Gauge Wire
Hand Cut (12 Gauge Wire)
8"-9" stakes available in dark green #VCSPS10
10" (1-9 pcs) $0.55 each
10" (10-49 pcs) $0.45 each
10" (50-99 pcs) $0.35 each (VIP)
Hand Cut (12 Gauge Wire)
11"-12" stakes available in brown #VCSPS13
15" (1-9 pcs) $0.60 each
15" (10-49 pcs) $0.50 each
15" (50-99 pcs) $0.40 each (VIP)
(12 Gauge Wire)
18" stakes available in dark green #VCSPS18
18" (1-9 pcs) $0.75 each
18" (10-49 pcs) $0.65 each
18" (50-99 pcs) $0.55 each
18" (100+ pcs) $0.45 each (VIP)
18" (Case of 500 pcs) $175 ($0.35 each)
(12 Gauge Wire)
24" stakes available in brown #VCSPS24
24" (1-9 pcs) $0.80 each
24" (10-49 pcs) $0.70 each
24" (50-99 pcs) $0.60 each
24" (100+ pcs) $0.50 each (VIP)
24" (Case of 500 pcs) - $200 ($0.40 each)
Note: Prices above do not include shipping.
Cases must ship separately from other items.
The #VCSPS are made of very sturdy 11 or 12 gauge wire and can be bent and shaped into many useful forms.
We have two gauges and a variety of lengths to choose from.
They work perfectly with all of our plant clips.
In order to receive rubber tips, you must buy them separately. (See below)
Chula Orchids
Steel Wire Hangers and Vinyl Coated Plant Stakes
We offer high quality steel 4 wire hangers that do not rust as well as vinyl coated steel plant stakes. Two great options for your orchids!
Heavy Duty Steel 4-Wire Hangers
Part Number: #S4WH
(1-9) - $2.75 each plus shipping
(10+) - $2.50 each plus shipping