Micro Spray Emitters
50¢ each any quantity + shipping
 Useful on any types of plants in the yard and really stingy with the water. Spread is better for root growth on large plants. can be mounted with red tip up or facing down,
still work fine. My water system here will run about 200 of these emitters at one time,
for me that has been four hours watering in the past. The line for the 200 emitters is also
fed first into a Fertilizer Injection machine, that cuts down the flow rate a bit.
Puts out water in 15 directions from tiny little holes, and they are
controllable as to how much water you want delivered.
Did I mention they are tiny!! These are really small and you can run a zillion
of them at one time. I have about 250 45 gallon pots in the back yard with one
emitter in each tub. By adjusting each emitter on the Painted Metal Plant Stake
up or down and using the green control valve I can control how the spray hits in
the tubs and how much water each plant gets individually or for whatever plants
that tub is holding. Each plant can be different and the adjustment handle is easily read.
Your water pressure and gph will determine how many you can actually run and
get excellent water delivery.
 Green Handle in the Off position. Next partially on. On the right, handle in line with the tubing, fully ON. With all the control you have with these little emitters it's possible to have them put out from Zero GPH TO 25 GPH. This little green lever is the GPH final control.
With a barbed tip it will fit into any 1/4" dripper line and
even has 10-32 threads on the end so you can screw
them in if you want to mount them in PVC. Below are some pictures
of mounted micro emitters shown in different types of plants
and positions.
|
